WATER STANDARDS

AWWA Standards & Manuals
  • ANSI/AWWA C651 Disinfecting Water Mains
  • ANSI/AWWA C901-20 Polyethylene (PE) Pressure Pipe and Tubing, 3/4 In. (19 mm) Through 3 In. (76 mm), for Water Service
  • ANSI/AWWA C906-15 Polyethylene (PE) Pressure Pipe and Fittings, 4 In. Through 65 In. (100 mm Through 1,650 mm), for Waterworks
  • AWWA M55: Manual for the Design and Installation of Polyethylene Pipe in water Applications.
  • AWWA Pipe Profile Series- PE Pipe (DVD)
  • C622-19 - Pipe Bursting of Potable Water Mains 4-in. to 36-in.
  • M28 - Rehabilitation of Water Mains, Third Edition
ASTM Standards
  • ASTM D2239 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
  • ASTM D2321 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
  • ASTM D2683: Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing.
  • ASTM D2737 Standard Specification for Polyethylene (PE) Plastic Tubing
  • ASTM D2774 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
  • ASTM D3035: Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter.
  • ASTM D3261: Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing.
  • ASTM D3350: Standard Specification for Polyethylene Plastic Pipe and Fittings Materials.
  • ASTM F714: Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter.
  • ASTM F905: Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
  • ASTM F1055: Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing.
  • ASTM F1290: Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
  • ASTM F1533 Standard Specification for Deformed Polyethylene (PE) Liner
  • ASTM F2164: Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure
  • ASTM F2206: Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE)
  • ASTM F2263: Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
  • ASTM F2620: Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
  • ASTM F3183: Standard Practice for Guided Side Bend Evaluation of Polyethylene Pipe Butt Fusion Joint
  • ASTM F3190: Standard Practice for Heat Fusion Equipment (HFE) Operator Qualification on Polyethylene (PE) and Polyamide (PA) Pipe and Fittings
CSA Standards
  • CSA B137.1: Polyethylene Pipe, Tubing, and Fittings for Cold-Water Pressure Services.
NAVFAC Unified Facilities Guide Specifications
  • UFGS-33-11-00 Water Utility Distribution Piping
NSF Standards
  • NSF/ANSI 14 Compounds
  • NSF 61:
  • NSF 14:
  • AWWA C901 - NSF 61 / NSF 14
  • AWWA C906 - NSF 61 / NSF 14
FM Standards
  • FM 1613: Polyethylene (PE) Pipe and Fittings for Underground Fire Protection
Nuclear Regulatory Commission, NRC
  • NRC List of Relevant HDPE Standards for Nuclear Piping for Safety and Non-Safety Related Applications
Trenchless
  • ASTM F1962: Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
  • ASTM F585: Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
  • C622-19 - Pipe Bursting of Potable Water Mains 4-in. to 36-in.
  • International Pipe Bursting Association/Specifications
  • M28 - Rehabilitation of Water Mains, Third Edition
US ARMY CORPS OF ENGINEERS
  • Directional Drilling Recommendations